FOLDING GLASS SYSTEM WITH HEAT WINDOW
- System M2 weight is 26 kg.(8 mm with single glass)
- The height to be used in the system is 3000 mm.
- System maximum wing width is 650 mm
- Glass used in folding glass system with Isıcamlı 4+22+4) 30 mm. Jaluzi can be applied between the two glass.
- Single glass if desired 6 – 8 – 10 mm tempered glass can be used.
- The system can be adjusted up to 2.5 cm or up easily thanks to the system’s adjustment enclosure. The adjustment enclosure profile also provides the convenience of mounting the system in a non-scale environment.
Folding glass system with Isıcamlı must be carried from above. 4 bearings are used on each wing. While there are two different upper wheel wings, the lower wheels without bearing guides the wings.
- Since the horn length on the way out is small, the curtain can be attached.
The lock system is hidden. The cartridge used in the first wing is automatically locked when the system shuts down thanks to spring. This feature also serves as a child safety lock.
- The system is safe against theft thanks to the PVC lock placed on the bottom case exit path.
- Folding glass system with Isıcamlı provides the advantage of mounting ease with corner joint wedges.
- Thanks to the water evacuation channels in the lower case, the system is guaranteed not to get water.
- In the folding glass system with Isıcamlı, through the space between the wing and the glass, the droplets that may occur without rainwater or condensation are filtered down and directly into the water drain channels and thrown out of the drain hole in the lower case
- Folding glass system with Isıcamlı special stainless screw and ring to make glass and wing combination without the need for use of silicone provides easy assembly and manufacturing.
- Corner rotation can not be done in the system.
The recommended colours for the folding glass system with Isıcamlı are all RAL colors.